Onkyo CR-N1 - Manual (Page 35)

35
Playing CDs
The CR-N1 features a vertical disc loading
compartment.
1
To open the disc compartment, press the
OPEN/CLOSE (
) button on the CR-N1
(the door slides open).
2
Mount the CD onto the spindle with the
labelled side facing forwards as shown.
Make sure that the disc is mounted
securely.
Do not touch the pickup lens. Doing so
may cause a malfunction.
3
To close the disc compartment, press the
OPEN/CLOSE (
) button again.
To unload a disc, press the OPEN/CLOSE
(
) button, wait until the disc compart-
ment door is fully open, and then remove
the disc.
1 To select the CD input source, press the
INPUT button on the CR-N1 repeatedly
until “CD” appears on the display, or
press the CD button on the remote con-
troller (the CD indicator appears).
2
To start CD playback, press the
PLAY/PAUSE (
) button on the
CR-N1, or the PLAY ( ) button on the
remote controller (the play indicator
appears).
Playback commences with the first track
and stops automatically when all tracks
have been played.
If the CR-N1 is in Standby mode and
there’s a CD in the disc compartment, the
CR-N1 turns on automatically, selects CD
as the input source, and starts playback
when the PLAY/PAUSE (
) button is
pressed.
If the input source is changed during CD
playback, playback stops.
The Volume, Muting, and Acoustic Pres-
ence functions can all be used with CD
playback.
OPEN/CLOSE
INPUT
PLAY/PAUSE CD
PLAY
Loading discs
Pickup
Starting playback
C D
Remote
controller
C D
Remote
controller