Onkyo CR-N1 - Manual (Page 39)

39
Playing CDs
CD tracks are normally played in sequential
order. With Memory Playback, you can
choose the playback order of up to 20 tracks.
1
With playback stopped, press the MEM-
ORY button on the CR-N1 or remote con-
troller (the MEMORY indicator appears).
Note that tracks can be memorized using
the numeric keypad during playback, in
which case it’s not necessary to stop play-
back before pressing the MEMORY but-
ton. When the MEMORY button is
pressed during playback, the current track
is automatically memorized.
2
Use the Next ( ) and Previous
( ) buttons to select the first
track and then press the MEMORY but-
ton. Alternatively, use the numeric key-
pad on the remote controller to
memorize tracks directly, eliminating the
need to press the MEMORY button.
Remote controller (direct memory entry)
The selected track is memorized and its
program number flashes on the display
for a few seconds.
3 Repeat step 2 to memorize further
tracks.
The program number increments as each
track is memorized.
The message “FULL” appears if you
attempt to memorize more than 20 tracks.
4
To remove the last memorized track,
press the STOP (
) button. Press again
to remove the track before that and so
on.
Memory playback
MEMORY
MEMORY
/
PLAY
PLAY/PAUSE
STOP
Numeric keypad
C D
MEMORY
Remote
controller
TRACK C D
MEMORY
TRACK C D
MEMORY
Remote controller
Remote controller
Continued...