Onkyo CR-N1 - Manual (Page 20)

20
Getting connected
Note that the D-N1 speakers are not supplied
with all models.
Location precautions
• The speaker cabinets are made from
wood, making them sensitive to extreme
temperatures and humidity.
• Do not put the speakers in locations sub-
ject to direct sunlight or in humid places,
such as near an air conditioner, bathroom,
or kitchen.
Using with a TV or computer
TVs and computer monitors are magnetically
sensitive devices and as such are likely to suf-
fer from discoloration or picture distortion
when normal speakers are placed nearby. To
prevent this, the D-N1 speakers feature inter-
nal magnetic shielding. In some situations,
however, discoloration may still be an issue,
in which case you should turn off the TV or
monitor, wait 15 to 30 minutes, and then
turn back on again. This normally activates
the degaussing function, which neutralizes
the magnetic field, thereby removes any dis-
coloration effects. If discoloration problems
remain, try moving the speakers away from
the TV or monitor. Note that discoloration
may also be caused by a magnet or demag-
netizing tool in close proximity to the TV or
monitor.
When speakers are used close to a TV or
computer monitor, due to the noise caused
by the electromagnetic waves from the TV or
monitor, you may hear noise from the speak-
ers even after the CR-N1 has been turned off.
To prevent this, position the speakers away
from the TV or computer monitor.
Operation precautions
The speakers have been designed to handle
the specified input power when used for
normal music reproduction. If any of the fol-
lowing abnormal signals are fed to the
speakers, even if the input power is within
the specified range, the speakers may be
damaged: noise produced when no FM sta-
tion is tuned; the sound produced when fast
forwarding a cassette tape deck; high-fre-
quency sounds generated by an oscillator,
electronic musical instrument, and so on;
oscillating amplifier signals; special test sig-
nals from audio test CDs, and so on; sounds
produced when connecting and disconnect-
ing audio cables (always turn off the CR-N1
before connecting and disconnecting audio
cables); microphone feedback.
Since the tweeters use strong magnets, do
not place metal objects such as screwdrivers
near to them. Otherwise, the object may be
attracted towards the tweeter causing injury
or damage to the tweeter.
D-N1 speakers
208 mm (8-3/16")
165 mm (6-1/2")
271 mm (10-1
1/16")
165 mm (6-1/2")
112 mm
(4-3/8")
160 mm (6-5/16")
(without grille) (with grille)
Side view
Front views