Omron NT20M User Manual
Page 36
32
3.
Specify “Direct.” Indirect referencing is not currently supported. The nu-
meral table will be displayed.
4.
Specify the desired table entry number. The initial value input field (con-
tents) will be entered. The headings in the table are described in the
following table.
Heading
Meaning
No.
Numeral table entry number
Contents
Initial value
IN initialize at startup)
Indicates whether or not the table value is to be
initialized when the PT is turned ON.
# (quantity)
Number of PC words used
Word
Address of the first PC word
Comment
User comment area
5.
Input the desired initial value. This value can be omitted here if desired
and input later using the table edit operation. The initial value can be up
to 8 digits long. When the initial value field is left, the following display
will appear to input the remaining settings.
Numeral Displays
Section 2-2