Omron NT20M User Manual
Page 90
86
PT
Limitations
PT with Touch Panels (DT
___
)
Touch switches 231 to 255 cannot be used.
PT with Function Keys (DF
___
)
Stand-alone operation is not supported.
PT without Function Keys (DN
___
)
12-key Function Key Units
Stand-alone operation is not supported.
32/16 Terminals
F1 to F12 and F17 to F29
10/02 Terminals
Numeral editing not supported. F1 to F10
can be used for stand-alone operation.
Operation
Select EXTEND from the Initial Edit Display to access the Extended Features
Display shown below. This display will appear only if direct connection is set
to No in the Tool Settings.
Extended Features Display
Use the following procedure to allocate screens to switches/function keys.
1, 2, 3... 1.
Press the Enter Key to access the Stand-alone Setting Display.
Stand-alone Operation
Section 2-15