Omron NT20M - Manual (Page 85)

81
another continuous or overlapping screen, it results in a screen error. A
check can be performed as shown below from the Screen Selection Display
1, 2, 3... 1. Press NEXT, F3 (Check). A message will appear asking whether or not
you want the results of the screen check to be printed out.
2. Select “Yes” or “No” and then press the Enter Key. Regardless of wheth-
er you select Yes or No, the results will be displayed on the screen. The
contents will be displayed as shown below. The results of the check are
printed out in the same form.
Item Contents
No. Shows the numbers of all screens designated as parent screens
for continuous or overlapping screens.
Error Indicates whether or not there is an error for the child settings.
Contents Shows the numbers of all screens designated as child screens. If
any of these child screens has an error, its number will be
underlined.
3. For any child screen with an error, redo the continuous or overlapping
screens.
Screen Check Section 2-13