Omron NT20M - Manual (Page 98)

94
4. Specify insertion or overwriting and press the Enter Key.
Note All previous data in the selected screen will be lost if overwriting is specified.
5. Specify the data to be copied. You can select from screen data, mark
data, number table data, character table data, direct connection informa-
tion, and I/O comments. A list of the files in the data directory specified
in the Tool Settings will be displayed when these settings are confirmed.
6. To read data from the displayed data directory, continue to step 8. To
change the directory, press F1.
7. Specify the drive and directory of the file to be read from. A list of files in
the specified directory will be displayed.
8. Specify the file from which a screen is to be read. A list of the screens in
the specified file will appear.
9. Specify the screen to read. A confirmation message will appear.
10. Confirm the read or cancel the operation by pressing any key but the
Enter Key. If the read is confirmed, the screen data will be inserted into
the specified screen or the screen that is read will overwrite the speci-
fied screen, as specified in step 4.
Reading Data from Other Files Section 3-4