Omron NT20M - Manual (Page 41)

37
and press the Enter Key. You cannot make a setting that will cause the guide
box to extend from the screen.
Deleting and Modifying You can delete or modify previously input character string displays. The pro-
cedures for these operations are the same as those for deleting and modify-
ing character strings. Refer to appropriate subsections of
2-1 Inputting Char-
acter Strings for details.
2-3-2 Direct Connection Character String Displays
Creating Use the following procedure to create a direct connection character string
display.
1, 2, 3... 1. Select STR DISP from the Initial Edit Display, a list of the character
string displays already existing in the current screen will be displayed.
2. Specify the number to be used in the table. This is not the character
string table and the numbers do not correspond to item numbers in the
character string table. When a number is specified, a display to set di-
rect or indirect referencing will appear.
Character String Displays Section 2-3