Omron NT20M - Manual (Page 69)

65
Deleting Numeral Editing You can delete numeral edit settings that have already been made.
1, 2, 3... 1. To delete a numeral editing setting, move the bar cursor to the setting
you want to delete on the Initial Display for Numeral Editing and then
press the Enter Key.
2. Press F1 (Delete). A confirmation prompt will be displayed on the
screen.
Note 1. If a numeral display is set for the selected numeral edit settings, then
those settings will be shown in a guide box.
2. The switch display at the bottom of the screen will disappear if all numeral
editing settings are deleted.
You can modify a numeral edit settings that has already been made.
1, 2, 3... 1. Move the bar cursor to the numeral edit setting you want to modify, and
press the Enter Key. The contents of the numeral editing setting that you
select will be displayed on the screen.
2. Modify the numeral edit settings as desired and press the Enter Key.
Note If a numeral display is set for the selected numeral edit settings, then those
settings will be shown in a guide box.
Modifying Numeral Editing
Numeral Editing Section 2-8