Omron NT20M User Manual
Page 80
76
•
The child screen has been designated for another parent screen.
•
No more than one child screen has been designated.
Continuous Screens
The screen numbers of the child screens you want to display continuously
are registered next. Register the child screen numbers in the order that you
want them displayed. You can register a maximum of 8 child screens.
1, 2, 3... 1.
Select all the screen numbers of the child screens you want with the
cursor and Space Bar. The screen numbers that you select will be
marked with asterisks.
2.
When all of the child screens you want have been marked, press the
Enter Key.
3.
Select scrolling by screen or by line, and then press the Enter Key to
select a screen. Asterisks will appear by selected as child screens. For
line scrolling, scrolling is done in increments of 8 dots. The NT600M
does not have the line scrolling function, so the screen shown below will
not be displayed. Also, line scrolling cannot be used with the direct con-
nection function.
Continuous and Overlapping Screens
Section 2-11