Oricom DECT MI40 - Manual (Page 10)

19 of 72
• Press to confirm.
•
If no number was entered but is pressed, the feature will
be de-activated.
•
Press to exit. A blinking DIR DIAL is displayed during
standby.
To de-activate:
• Press will go directly to DIR DIAL
• Press . The display will show ON.
•
Press to select OFF.
•
Press to de-activate the function.
• Press and hold to return to standby.
• The blinking DIR DIAL on the display is turned off.
Using Last Number Re-Dialling function
The last 10 numbers dialled (up to 18 digits) are stored. If a
number is dialled several times, its position in the list will be
changed to reflect the real history of last dialled calls. Pause #
and recall keystrokes are also in the redial number.
Only the first 18 digits will be saved as redial number. If the
number consists of more than 16 digits, the first 16 digits together
with the icon will be displayed. Press to view the remaining
digits.
You can select any number on the redial list to redial in Pre-
Dialling mode. However, you can only select the last number for
redial in dialling mode.
20 of 72
Redial the Last Dialled Number
• Press and wait for dial tone.
•
Press , the last number dialled will be displayed and
dialled out automatically.
Note: The display will show EMPTY if there is no number in the
redial list.
Redial the Last Dialled Number by Using Pre-dialling
• Press , the last number dialled will be displayed.
•
Press to scroll through the last 10 dialled numbers.
• Press .
• The icon on the display will be turned on.
• The phone will connect the line and dial the number displayed.
• The icon on the display will also be turned on.
Save the Redial Number in the Phonebook
•
Press , the last number dialled will be displayed.
• Press to scroll through the last 10 dialled numbers.
•
Press on the number you wish to save.
•
The display will show SAVE ENTRY.
• Press . The display will show NAME?
• Use the numeric keys & the key to enter the name. If
name is not entered, the entry will be identified by a set
Of brackets ( ).
•
Press to confirm. The redial number will be displayed.
•
Edit the number by using the numeric keys & the key.