Oricom DECT MI40 - Manual (Page 14)

27 of 72
•
Press .
•
The name of the entry will be displayed.
•
Use the alphanumeric keypad and the key to make the
changes.
• Press to confirm.
• The number of the entry will be displayed.
• Press to delete any digits you wish to alter and re-enter the
number.
•
Press to confirm.
•
Press to return to phonebook.
•
Press and hold will exit to standby.
Dialling a number from Phonebook
• Press during predial or standby. The display reads ADD
ENTRY.
•
Use to scroll through the records Press to view the
number.
• Press on the selected phonebook record to dial out the
number.
Deleting a Phonebook Entry
• Press during predial or standby.
• The display reads ADD ENTRY.
• Use to scroll through the records.
• Press on an entry (except ADD ENTRY).
• The display will show EDIT ENTRY.
• Use to scroll until DELETE is displayed.
• Press , DELETE? is displayed.
28 of 72
•
Press to confirm and the selected entry is deleted. The
display will return to phonebook.
•
Press to exit.
•
Press and hold will exit to standby.
Note: Refer to Delete All Records section to delete the entire
phonebook at once.
VIP Ringing (Melody)
You can assign a distinctive ringing tone to incoming calls from
specific callers. When the CID of an incoming call matches with a
phonebook number, the phonebook name will be displayed and the
VIP melody defined for that record, provided the VIP melody is set to
on, will be played as the handset ringing melody.
•
Press during predial or standby.
• The display reads ADD ENTRY.
•
Use the numeric key, the key to scroll through the records.
• Press on an entry (except ADD ENTRY).
• The display will show EDIT ENTRY.
• Use to scroll until VIP MELODY is displayed.
•
Press . Use to choose OFF or ON.
•
Press .
• If OFF is chosen, only the external melody will be played when a
call from this number come in.
•
If ON is chosen, Use to select one of ten melodies: MELODY
1 to MELODY 10. Press on a melody to confirm the VIP
ringing for the selected number.
• Press to return to phonebook.
• Press and hold will exit to standby.