Oricom DECT MI40 - Manual (Page 29)

57 of 72
• Press . Use to scroll through the menu until the display
reads INT MELODY.
• Press .
• Use to select the desire melody, MELODY 1 to MELODY 10,
for internal call ringing.
•
Press to confirm the selection and exit to INT MELODY.
•
Press and hold will exit to standby.
Note: The default ringer melody for internal calls is MELODY 2.
Ringing Volume for Base
• Press . Use to scroll through the menu until the display
reads SOUNDS.
• Press . Use to scroll through the menu until the display
reads BS RINGER.
• Press . The display reads VOLUME.
•
Press .
• Use to select from , , , , and VOL
OFF. represents the minimum volume level whereas
represents the maximum volume level.
• Press to confirm the selection and exit to VOLUME.
To turn off the base ringer volume, press on VOL OFF.
Base Ringer Melody for External Calls
• Press . Use to scroll through the menu until the display
reads SOUNDS.
58 of 72
• Press . Use to scroll through the menu until the display
reads BS RINGER.
• Press . Use to scroll through the menu until the display
reads MELODY.
• Press .
• Use to select the desire melody, MELODY 1 to MELODY 10,
for incoming external call ringing.
• Press to confirm the selection and exit to MELODY.
•
Press and hold will exit to standby.
Alert Tones
User can choose to turn on or off the following tones according to
your preference.
Key Beep: You will hear tone each time a key is pressed. For long
presses, there will be two tones: one upon key
depression and the other upon long press being
activated.
Confirmation: You will hear a tone when a setting or choice is
confirmed.
Charging: You will hear a tone when the handset is returned to
the base cradle for charging.
• Press . Use to scroll through the menu until the display
reads SOUNDS.
•
Press . Use to scroll through the menu until the display
reads TONES.
•
Press . Use to select from KEY BEEP, CONFIRM and
CHARGING.
•
Press on a selection to select ON or OFF.
• Press to confirm the selection and exit to CHARGING.
• Press and hold will exit to standby.