Oricom DECT MI40 - Manual (Page 13)

25 of 72
provided AUTO ANS is ON. Once the call is ended by pressing
or returning to the cradle, the keypad remains locked.
Low Power Mode
You may put the handset in low power mode to conserve the battery
consumption. The display and ringer will be turned off. Any incoming
calls will ring at the base and other handsets that are not on low
power mode.
To activate Low Power Mode,
•
Press and hold for 2 seconds during standby.
To de-activate,
• Press ; or
• Place the handset back on the cradle
Using the Phone Book
Storing an Entry
• You can store up to 50 phone records with up to 10 characters for
name and 18 digits for number.
• To store a phone record, press during predial or standby.
• The display reads ADD ENTRY.
• Press . The display reads NAME?
•
Use the alphanumeric keypad to enter the name of the person
whose telephone number you wish to enter. If no name is entered,
the name will be displayed as ( ) in the phonebook.
• Press . The display reads NUMBER?
• Enter the telephone number (maximum 18 digits), the icon will
show when the number is more than 16 digits.
• Press to confirm storing of the number. The telephone
number entered must be unique. If not, the display will remain at
the number.
26 of 72
• To exit, Press .
Note: If there 50 records have been added, pressing at ADD
ENTRY will display FULL and then return to ADD ENTRY.
The Phonebook record and Services number cannot be the
same.
Reviewing the Phonebook
• Press during predial or standby.
•
The display reads ADD ENTRY.
• Use the or key to scroll through the entries.
• You may also use the alphanumeric keys to view the entries.
When 1…0 is pressed, the first alphabetically entry starting with
the first character of the key will be displayed. Pressing the same
key again will display the first entry starting with the next available
character. For example, pressing once, entry starting with
A will be displayed. Pressing twice, entry starting with B
will be displayed.
• Press on the name of an entry, the number of the entry is
displayed.
• If the number consists of more than 16 digits, the icon is turned
on and the first 16 digits of the number are displayed. Press ,
the remaining digits are displayed.
•
Press again will display the name of the entry.
•
To exit, press .
Editing an Entry
•
Press during predial or standby.
• The display reads ADD ENTRY.
• Use the numeric key, or key to scroll through the records.
•
Press on an entry (except ADD ENTRY).
•
The display will show EDIT ENTRY.