Oricom DECT MI40 - Manual (Page 34)

67 of 72
•
The external call will be put on hold and internal dialling tone can
be heard from the earpiece or speaker.
•
The icon is displayed in addition to and icons.
•
Press the number of the handset you wish to call.
• When the other handset answers the call, press on the
handset or place the handset on the cradle will transfer the call.
The and icons will be turned off.
Conference Call
Conference call can be activated between external call, and two
handsets.
•
During an external call, press .
•
The external call will be put on hold and internal dialling tone can
be heard from the earpiece or speaker.
•
The icon is displayed in addition to and icons.
•
Press the number of the handset you wish to call.
•
When the other handset answers the call, press and hold the
will activate the conference call. The icon on both handsets
will be turned on.
•
You can exit the conference call by pressing on the handset
or place the handset on the cradle. The other handset and the
external call will still be connected. The and icons will be
turned off.
Room Monitoring
When more than one handset is registered to the same base unit, one
of the handsets can be used as a room (baby) Monitor device.
To activate:
•
Press . Use to scroll through the menu until the display
reads FEATURES.
68 of 72
• Press . Use to scroll through until the display reads
MONITOR.
• Press . Use to select ON.
• Press .
• Press and hold to exit to standby.
MONITOR will flash on the display to indicate the handset is in
monitor mode during standby. User can make internal call to this
handset from another handset, the microphone on this handset is
activated (being in monitor mode) and noise from the room can be
heard. User can also press to hear from the speaker. There will
be no internal ringing.
To de-activate:
• Press will take you to the MONITOR menu directly.
•
Press . The display reads ON.
• Press to select OFF.
• Press to confirm and exit to MONITOR.
• Press and hold to exit to standby.
Note: The handset under monitor mode will not ring when an external
call comes in.
De-register a Handset
One handset can de-register all other handsets registered to the
same base unit.
•
Press . Use to scroll through the menu until the display
reads SYSTEM.
• Press . Use to scroll through until the display reads
DELETE HS.