Oricom DECT MI40 - Manual (Page 31)

61 of 72
•
Press . Use the numeric keys and to enter the name for
the handset (max 10 characters).
• Press to confirm the name entered and exit to LABEL.
• Press and hold will exit to standby.
Call Timer
The length of the call can be timed and displayed. The timer will start
counting once the phone goes off hook. When the call has started for
10 seconds, the call timer in the format of mm:ss (e.g. 00:10) will be
displayed if the call timer is activated. Once the timer reaches 59
minutes and 59 seconds (59:59), the format will change to hh:mm
(e.g. 01:00). Call timer will reset to 00:00 (mm:ss) and start over again
after 17 hr 59 min 59 sec (17:59). When the call has ended, the call
timer will stop counting and keep on displaying for 5 seconds.
To activate:
• Press . Use to scroll through the menu until the display
reads DISPLAY.
• Press . Use to scroll through the menu until the display
reads CALL TIMER.
•
Press . Use to scroll until the display reads ON.
• Press to confirm and exit to CALL TIMER.
• Press and hold will exit to standby.
To de-activate:
•
Press . Use to scroll through the menu until the display
reads DISPLAY.
•
Press . Use to scroll through the menu until the display
reads CALL TIMER.
•
Press . Use to scroll until the display reads OFF.
62 of 72
•
Press to confirm and exit to CALL TIMER.
•
Press and hold will exit to standby.
Backlit LCD
The backlight will turn on:
•
when a key is pressed
• when the handset is powered up
• when there is an incoming call
• when paging from the base
The backlight will automatically turn off:
•
approx. 10 seconds after a key is pressed
•
when paging is stopped by itself
• when the incoming internal call ends without being answered
• when the incoming call expires at the handset.
User can also choose to turn off the Backlit LCD by
• Pressing . Use to scroll through the menu until the display
reads DISPLAY.
• Press . Use to scroll through the menu until the display
reads BACKLIT.
•
Press . Use to select OFF.
• Press to turn off the backlight.
To turn on the backlit, user can
•
Press . Use to scroll through the menu until the display
reads DISPLAY.
•
Press . Use to scroll through the menu until the display
reads BACKLIT.
•
Press . Use to select ON.
•
Press to turn on the backlight.