Oricom DECT MI40 User Manual
Page 11
21 of 72
•
Press
to confirm the entry and exit to SAVE ENTRY.
•
Press
to return to the redial list.
Delete a Redial Number
•
Press
, the last number dialled will be displayed.
•
Use
to scroll through the last 10 dialled numbers.
•
Press
on a selected number. SAVE ENTRY will be
displayed.
•
Use
to scroll until the display reads DELETE.
•
Press
. The display reads DELETE?
•
Press
. The selected number will be deleted. The display
will return to the redial list.
•
Repeat the steps to delete another dialled number.
•
Press
to exit the redial list.
Note: You can refer to Delete All Records section to delete the entire
redial list at once.
Inserting Pause for PBX System
Press and hold
to insert a Pause of 3 seconds will be
shown on the display.
Note: If there is a in the predial, phonebook, redial or service
number, the handset will pause for the pre-programmed
duration before dialling out the next digit.
Receiving External Calls
When receiving an external call, all handsets including the base unit
will ring, provided that the ringers are turned on. The
icon on the
22 of 72
display will blink. The LED on the handset and the In Use LED on the
base unit will also blink.
When the handset is on the base unit, lift the handset:
•
To answer the call when the AUTO ANS feature is turned on.
•
Press
to connect the call if the AUTO ANS feature is
turned off. (Refer to section “Auto Answering” for details)
When the handset is not on the base unit:
•
Press
to connect the call.
Recall
The
key s also used for a number of Network services provided
by your telephone network operator, and for use when connected to
certain telephone PBX’s. Details on how to use this button will be
explained by your network service provider. (Refer to Recall Timing
Section)
Adjusting the Handset Ringing Volume
•
Press
. Use
to scroll through the menu until the display
reads SOUNDS.
•
Press
. Use
to scroll through the menu until the display
reads HS RINGER.
•
Press
. The display reads VOLUME.
•
Press
.
•
Use
to select from
,
,
,
,
and VOL
OFF.
Represents the minimum volume level whereas
represents the maximum volume level.
•
Press
to confirm the selection and exit to VOLUME.