Oricom DECT MI40 - Manual (Page 32)

63 of 72
Delete All Records
You can reset the phonebook records, redial list, call log and network
services numbers by using this menu.
• Press . Use to scroll through the menu until the display
reads RESET.
• Press . Use to scroll until the display reads RECORDS.
• Press . The display will show RESET?
• Press to confirm and exit to RECORDS.
•
Press and hold will exit to standby.
Note: Once reset, all entries in the phonebook, redial list, call Log are
deleted and the network Services numbers are reset to factory
default.
Using Additional Cordless Handsets
Registration
Each additional compatible handset must go through the registration
process with the base. Each Oricom handset can be registered with
up to 4 base units. Each base can have up to 5 handsets registered
to it.
When registering, each handset can select base number for the base
to be registered so that it can be identified at base selection setting.
To register:
• Press . Use to scroll through the menu until the display
reads SYSTEM.
• Press . Use to scroll through the menu until the display
reads REGISTER.
• Press . The display will read BS 1 2 3 4.
64 of 72
•
Enter the number of the base unit you wish to register using the
numeric key.
•
The handset will read PIN?
• Enter the PIN number (default is 0000).
• Press and hold the PAGE button on the base unit until you
hear 2 beeps.
• Press on the handset. The handset will read SEARCH BS X
while it searches for the base unit (where ‘X’ is the number of the
base you are registering to).
•
Once a connection has been made, the handset name and
number (the next available number if the number of handsets
already registered with the base is less than 5) will be shown on
the display.
Base Selection
AUTO
If the base selection setting is set to auto, whenever the
handset is lost link or powered up, it will search any
available registered base to connect.
Fixed
One of the bases registered can be assigned as a fixed
base so that it will be the only base to be searched when
the handset is lost link or powered up.
To set:
• Press . Use to scroll through the menu until the display
reads SYSTEM.
• Press . Use to scroll through the menu until the display
reads SELECT BS.
• To select AUTO,
o Press . The display reads AUTO.
o Press will confirm the selection. The handset will search
any available registered base during registration.
• To select Fixed base,