Oricom DECT MI40 - Manual (Page 8)

15 of 72
Service Menu
Select a Service
EDIT ENTRY
DELETE
ADD ENTRY
NAME?
Enter Name
NUMBER?
Enter Number
16 of 72
Basic Operations
During Standby
When the phone is not in use, the LCD displays the phone model no.,
the handset no., the battery icon, and the Signal indicator.
Making External Calls
Using Traditional Dialling
•
Press and wait for dialling tone.
• The icon on handset will be turned on.
• The LED on the handset and the In Use LED on the base unit
will also be turned on.
•
Use the keypad to dial the phone number. The display shows
the digits as you enter them.
•
If more than 16 digits are entered, the icon will be turned on.
Only the last 16 digits will be displayed.
• The call timer will display after a while and start timing the call.
To End a Call
•
Press , or
• Place the handset back on the base unit.
• The duration of the call will remain for about 5 seconds after
you hang up.