Oricom DECT MI40 - Manual (Page 21)

41 of 72
• Use scroll through the menu until the display reads ANSWER
MAC.
• Press .
•
Use to scroll until the display reads RING DELAY.
• Press . The current ring delay will be displayed.
•
Use to select among ECONOMY, RING2 to RING7.
•
Press to confirm the selection and exit to RING DELAY.
Alert Tone
When the alert tone is set to ON, a short beep will be emitted once
every minute from the handset speaker during standby when there is
at least one new ICM or new memo on the answering machine.
• Press to enter the menu mode
•
Use scroll through the menu until the display reads ANSWER
MAC.
• Press .
•
Use to scroll until the display reads ALERT TONE.
•
Press . The current setting is displayed.
• Use to select ON or OFF.
•
Press to confirm the selection.
Note: This feature is handset dependent. You may turn this feature
on and off on each handset registered to the system.
42 of 72
Message Length
User can specify the maximum duration of the message (ICM) or
memo that can be recorded. There are two choices of message
length: 1 minute or 2 minutes.
•
Press to enter the menu mode
• Use scroll through the menu until the display reads ANSWER
MAC.
•
Press .
• Use scroll through the menu until the display reads MSG
LENGTH.
• Press . The current message length will be displayed.
• Use to select one of the two choices.
• Press to confirm the selection and exit to MSG LENGTH.
Speaker Filtering
Speaker Filtering is to allow all calls to be listened on the speaker of
handsets #1. Once activated, handsets #1 speaker will be turned on
automatically when the answering machine answers the call. User will
be able to hear the OGM and ICM recording from handset #1 speaker.
•
Press to enter the menu mode
• Use scroll through the menu until the display reads ANSWER
MAC.
• Press .
• Use scroll through the menu until the display reads SPK
FILTER.
• Press . The current setting will be displayed.
• To activate speaker filtering,