Qualstar 501440 Rev. G - Manual (Page 20)

Note that all TLS models are shipped from the factory without the SCSI interconnect
cables or terminators installed.
The following figures and tables represent the preferred cabling for a library with two
to eight tape drives.
Fibre Channel Cable
To Host or Switch
Drive 1
Drive 2
FCO Executive PCBA
SCSI Channel 0
SCSI Channel 1
Terminator
Fibre Channel Cables
To Host or Switch
Figure 4-5 TLS-82xx Cabling Diagram
Connectors on Rear of FCO Connectors on Rear of
TLS-82xx
FCO: SCSI Channel 0 Medium Changer
FCO: SCSI Channel 1
(Terminator)
FCO: Serial Jumper
Table 4-5 Preferred TLS-82xx Fibre Channel Option Cable Connection
501440 Rev. J
FCO Type C Installation 4-7