Fco type b installation 5-11 – Qualstar 501440 Rev. G User Manual
Page 43
8.
Connect the cable from the serial connector on FCO 1 to the DB9 connector O on
the TLS.
9.
Connect a SCSI Cable from the SCSI Channel 0 connector on FCO 2 to connector
I.
10.
Connect a SCSI Cable from the SCSI Channel 1 connector on FCO 2 to connector
K.
11.
Connect a SCSI Cable from the SCSI Channel 2 connector on FCO 2 to connector
M.
12.
Attach an LVD SCSI terminator at connectors J, L and N.
13.
Connect the cable from the serial connector on FCO 2 to the DB9 connector P on
the TLS.
Fibre Channel Cables
To Host or Switch
SCSI Channel Cables
FCO 2
FCO 1
SCSI Channel Cables
Right Side
Left Side
Drive 1
Drive 2
Drive 3
Drive 4
Drive 5
Drive 6
Drive 1
Drive 2
Drive 3
Drive 4
Drive 5
Drive 6
To SCSI Channel 0 on FCO 2
Bridge Cable
Terminators
Terminators
To SCSI Channel 1 on FCO 2
To SCSI Channel 2 on FCO 2
Terminators
To SCSI Channel 0 on FCO 1
To SCSI Channel 1 on FCO 1
To SCSI Channel 2 on FCO 1
Executive PCBA
Terminators
Terminators
Terminators
Fibre Channel Cables
To Host or Switch
Figure 5-7 TLS-412xxx Cabling Diagram for up to 12 AIT-5 Tape Drives
501440 Rev. J
FCO Type B Installation
5-11