Qualstar 501440 Rev. G - Manual (Page 35)

Note that all TLS-4000 models are shipped from the factory without the SCSI interconnect cables or termi-
nators installed. The following tables and figures represent the preferred cabling for a library with two to
12 AIT tape drives.
5.3 Cabling for TLS-44xxx Libraries with AIT-5 Tape Drives
Drive 1
Drive 2
Drive 3
Drive 4
Terminators
FCO
Executive PCBA
SCSI Channel 0
SCSI Channel 1
Fibre Channel Cables
To Host or Switch
Figure 5-2 TLS-44xx Cabling Diagram using AIT-5 Tape Drives
Connectors on Rear of FCO Connectors on Rear of TLS-44xx
FCO: SCSI Channel 0 Medium Changer
Tape Drive 1 (T1)
Tape Drive 2 (T2)
FCO: SCSI Channel 1 Tape Drive 3 (T3)
Tape Drive 4 (T4)
FCO: SCSI Channel 2 through 6 None
FCO: Serial Jumper
Table 5-2 Preferred TLS-44xx Fibre Channel Option Cable Connections for AIT-5 Tape Drives
501440 Rev. J
FCO Type B Installation 5-3