Qualstar 501440 Rev. G - Manual (Page 76)

501440 Rev. J
9-1 Repacking
9. Repacking
This chapter explains how to properly repack type C and type B Fibre Channel Op-
tions for shipping.
The following items were packed in the original shipping carton:
Fibre Channel Option
This Installation and Operation Manual
9.1 Repacking the Fibre Channel Option
With the exception of Fibre Channel Options that are shipped from the factory in-
stalled on libraries, the FCO was originally shipped in a specially-designed carton.
When shipping the FCO, use the original shipping carton and packing materials. If
the original shipping carton and packing materials are not available, order new ship-
ping materials by calling Qualstar Technical Support.
9.2 Preparation for Packing Type C Fibre Channel Options
CAUTION
Be sure to turn the library’s power off before installing or removing a Fibre Chan-
nel Option.
Prepare the FCO for packing as follows:
1. Remove power from the TLS: first turn the power switch off and then remove the
power cord.
2. If the FCO is connected the FC host or Hub, disconnect it.
3. Carefully remove the SFP (Small Form Factor Pluggable) adapter from the FCO.
They are located in the bottom of the FCO. See Figure 9-1. Store the SFP
adapter in a safe location.