Toshiba XLTR-200 - Manual (Page 63)

62
point’s value is “NO”. The drive network wiring, etc., should also be inspected
in such a condition in order to identify the cause of the communication outage.
22. OPER MODE
Drive operation mode. Corresponds to drive parameter 1015.
29. DAY.NIGHT
This is a mandatory FLN point required for compatibility with Siemens control
systems. It has no effect in this application.
99. ERROR STATUS
This is a mandatory FLN point required for compatibility with Siemens control
systems. It has no effect in this application.