Tyco 1540 - Manual (Page 23)

3.3 Access
To access the Set-up screens, press the and >> keys simultaneously for five seconds, until the
Password Introduction screen appears.
Password protection can be enabled to prevent unauthorised access to Set-up screens.
Password protection is not normally enabled when a product is shipped. The unit is protected if
the password is set to any four digit number other than 0000. Setting a password of 0000
disables the password protection.
3.3.1 Access with No Password Protection
Press >> from the Password Introduction screen. The 0000
password confirmation screen will appear.
Press >> again to proceed to the first Set-up screen.
3.3.2 Access with Password Protection
If the unit is protected by a password, proceed as follows:
21
Integra 1540, 1000, 0640, 0440, 0340, 0240 Issue 1 04/03
Password introduction
0000 Password confirmation
Password introduction