Tektronix AFG3000 - Manual (Page 107)

Syntax and Commands
AFG3000 Series Arbitrary/Function Generators Reference Manual 3-33
OUTPut[1|2]:POLarity
This command inverts a specified output waveform relative to the offset level. The
query command returns the polarity for the specified channel.
Group Output
Syntax OUTPut[1|2]:POLarity{NORMal|INVerted}
OUTPut[1|2]:POLarity?
Arguments NORMal sets the specified output waveform polarity to Normal.
INVerted sets the specified output waveform polarity to Inverted.
Returns NORM|INV
Examples OUTPut1:POLarity NORMal
sets the CH 1 waveform polarity to Normal.
OUTPut[1|2][:STATe]
This command sets or query whether to enable the arbitrary/function generator
output for the specified channel.
Group Output
Syntax OUTPut[1|2][:STATe] {ON|OFF|<NR1>}
OUTPut[1|2][:STATe]?
Arguments ON or <NR1>
≠0 enables the arbitrary/function generator output.
OFF or <NR1>=0 disables the arbitrary/function generator output.
Returns <NR1>
Examples OUTPut1:STATe ON
sets the arbitrary/function generator CH 1 output to ON.