TransAct Technologies ITHERM 280 - Manual (Page 240)

Programming Codes iTherm ® 280 Programmer’s Guide
Page 238 Rev C 28-07764
iTherm ® Citizen Emulation
The iTherm® 280 printer uses a subset of the Epson emulation for Citizen.
iTherm ® Star Emulation
The iTherm® 280 printer has Star emulation that will allow the iTherm to replace most
Star printers with similar features to the iTherm.
Star used a real time cash drawer command that uses features patented by Epson. If
you use the Star real time cash drawer command, you must use the added cost licensed
firmware.
iTherm ® Axiohm Emulation
The iTherm® 280 printer has an Axiohm emulation that closely matches the A793 and
A794 printers. The Axiohm command set (for the most part) is a superset of the Epson
emulation. Because several of the Axiohm commands make use of features that
patented by Epson, you must use the added cost licensed firmware to use these
commands. If you don’t need those commands and features, using the standard iTherm
firmware will result in a lower cost printer.