TransAct Technologies ITHERM 280 - Manual (Page 253)

ITherm ® 280 Color Graphics iTherm ® 280 Programmer’s Guide
28-07764 Rev C Page 251
•
Send the following text strings to the printer using whatever means is available to
you.
&%UBLogo& Begin defining macro "Logo"
&%UGLogo& End the Definition of "Logo"
&%UMLogo& Save Macro "Logo" to nonvolatile memory
•
A graphic image named “Logo” should now be stored in the nonvolatile memory.
•
To verify the image is present, use the “&%UQ&” IPCL command or the PJColor
Color Image Converter to print the name and size of the stored images.
Recall and print stored named graphic image
•
Send the following text string to the printer using whatever means is available to
you.
&%URLogo& Run Macro "Logo" (Print the macro)
Cautions
Universal graphics information is stored in the same place as user defined characters
and user defined macros. If you are using an emulation such as ESC/POS that supports
macros and/or user defined characters, universal graphics will compete for space with
these functions. In addition, the "&%UFALL&" (Erase universal graphics) will also erase
any user defined graphics and macros.
If you are using the Ithaca PcOS emulation, these commands are identical with the User
Store commands except for the terminator character. You may change the NUL
terminator to "&" with "&%UT&" if you find the "&" easier.