TechniSat 1 User Manual
Page 13
5.4 LNB-Setting/Adjustment of external unit/satellite selection
Once you have adjusted the receiver to your personal preferences, you should now, if neces-
sary, still adjust the receiver in accordance with your dish antenna. The receiver is pre-pro-
grammed at the factory for reception of ASTRA and EUTELSAT by means of a Universal
LNB (see annexure with technical terms. These programmes can be received without any
further adjustments, if your receiving equipment permits this.
If, however, you wish to receive signals from another satellite, or if you are using a different
type of LNB, then you must adjust the receiver as follows :
>
Press the
Menu
, key in order to display the
Main menu
.
>
Use the
arrow up/down keys
to mark the line
Settings
.
>
Confirm by pressing
OK
.
The menu
Settings
will be displayed.
>
Now mark the line
LNB Settings
by means of the
arrow up/down keys
.
>
Confirm by pressing
OK
.
The menu
LNB Settings
will be displayed.
13
DIGIBOX1_englisch.qxd 26.09.01 09:55 Seite 13