TechniSat 1 User Manual
Page 21
>
Press the
green
function key in order to delete the marked timer.
>
Press the
Back
to return to the EPG screen, in order to execute further programming
or
>
Press the
TV/Radio
key to return to normal operation.
The receiver will now select the chosen programme at the programmed time, and will, unless
otherwise selected, return to standby mode after the programme has ended.
6.12.2 Manual Programming/Changing timer settings
In addition to the option of programming the timer via the EPG, yoi can also programme the
timer manually. In order to do this, proceed as follows:
>
Select the next programme list, to get to the programme you wish to record (Point
6.2.3.1).
>
Press the
Menu
key to call up the Main Menu.
The
Main Menu
.will be displayed.
>
Mark the line designated
Timer
.
>
Confirm by pressing
OK
.
The menu
Main Menu Timer
will be displayed.
>
Press the
yellow
function key (New) to go to timer programming, to programme a
new event.
>
To change an existing timer setting, mark this by means of the
arrow up/down
keys. Press the
yellow
function key (Modify) in order to access the settings of the
marked timer.
21
DIGIBOX1_englisch.qxd 26.09.01 09:55 Seite 21