TechniSat 1 - Manual (Page 18)

6.4 Selecting a different language
If a programme is broadcast in several languages, you can use the following procedure to
select a different language:
>
Press the
Language Selection key
.
If more than one language is being broadcast, a list of currently broadcast languages
will be displayed on screed.
> Use the
arrow up/down keys
to mark the selected language.
> Confirm by pressing OK .
You can now listen to the soundtrack in the selected language. Your receiver is also equip-
ped to receive mono broadcasts. When these are current, you can use the
MONO1/
MONO2 to switch between the audio channels MONO1 and MONO2.
6.5 Switching between TV and Radio
The receiver has been pre-programmed with both TV and radio programmes. When recei-
ving a radio programme, the TV image is switched off, and only the programme name is dis-
played on screen.
>
Use the
TV/Radio
key to select radio reception for your receiver.
The receiver will now switch to the radio programme last selected.
> Pressing the TV/Radio key again will return you to the last TV programme selected.
6.6 Going back to previous programme viewed
Press the
Back
key on the remote control unit to go back to the previous programme vie-
wed.
>
Press this key again to again go back to the programme viewed before the current
one, i.e. to switch back and forth between two programmes.
6.7 Displaying clock and programme information
This function enables you to view the programme information relating to the programme cur-
rently selected.
>
Press the blue Tkey in order to display information relating to the currently selected
programme.
The lower half of the screen will now display current time, the name of the programme selec-
ted as well as the title of the current programme, as well as its starting and ending times,
provided this information is broadcast by the station.
>
If it is available, pressing the
blue
Multifunction key again will display information for
the following programme.
6.8 Additional programme information
Where available from the broadcaster, you can press the
Programme info
key to obtain
additional programme information.
>
Press the yellow function key to display an additional information window.
Further information on the current programme will be displayed.
> Pressing the yellow function key again will show information on the following pro-
gramme.
> To return to normal viewing, and switch off the display, press the
yellow
key yet
again.
18
DIGIBOX1_englisch.qxd 26.09.01 09:55 Seite 18