TechniSat 1 - Manual (Page 7)

7
> The receiver may only be operated in a temperate climate.
> Never open the cover of the unit! You may be subject to an electrical shock. Any
necessary opening of the unit may only be carried out by qualified personnel.
Operational breaks:
During a thunderstorm, or during prolonged periods of non-use, the unit should be dis-
connected from the mains.
In the following cases you should disconnect the unit from the mains, and consult a
qualified technician:
>
if the mains cable or plug are damaged
> when the unit has been exposed to dampness, or when liquid has entered the unit
> in case of severe malfunction
> in case of significant external damage
Disposal instructions:
The packaging of your receiver consists exclusively of recyclable materials. Please ensure
they are recycled via the “Green Dot” or relevant local system.
Please note that the discarded batteries of the remote control unit, as well as any electronic
parts, should not be disposed of with your domestic waste, but should be appropriately dis-
posed of (through retail trade, or local system for electronic waste).
Important operating instructions
The use of a so-called "On Screen Display" (information presented on TV screen, see exam-
ple) simplifies the operation of the receiver, and reduces the number of keys required on the
remote control unit. All functions are displayed on the screen, and can be adjusted with a
few key strokes. Related functions are grouped together in a "MENU". The function selected
is highlighted in a different colour. In the bottom line, the function keys red, yellow, green
and blue are represented by colour bars. These colour bars represent varying functions in
the individual menues, which can be performed by pressing the appropriate coloured key
(multi-function key) on the remote control unit. The function keys are only active when a brief
description is displayed in the appropriate field.
Help:
Where available, a brief help text can be displayed or switched off again by pressing the
blue function key.
Terms and key description that appear in the OSD menu are shown in bold type in this
manual.
Example:
>
Press the Menu key to display the menu Settings .
> Now select the menu line
OSD language
, by using the
arrow up/down keys
to
highlight the appropriate line.
> Confirm by pressing OK .
> The menu can be switched off again by pressing the
Menu
key, or by repeatedly
pressing the Back key.
DIGIBOX1_englisch.qxd 26.09.01 09:55 Seite 7