TechniSat 1 - Manual (Page 30)

> Use the arrow up/down keys to mark the line Settings .
> Confirm by pressing OK .
The sub.menu
>Settings
will be displayed.
> Now use the
arrow up/down keys
to mark the menu line
Factory settings
.
> Confirm by pressing OK .
The sub-menu >Factory settings will be displayed.
7.5.1 Activating default setting
This function allows you to go back to the default setting programmed in the factory, at the
same time deleting your own settings.
>
Use the arrow up/down keys to mark the menu line Restore Factory Set-
tings .
> Press the
OK
key.
The prompt “Really restore factory settings?” will be displayed.
> Use the arrow left/right keys to select Yes or Abort.
> Confirm by pressing
OK.
30
DIGIBOX1_englisch.qxd 26.09.01 09:55 Seite 30