TechniSat 1 - Manual (Page 24)

7.1.2 Entering programmes in the programme list
To add a programme to the selected programme list, proceed as follows:
>
Press the red function key (category). This will open a selection window in order to
switch between the user list and the main memory list. This main memory list contains
all available programmes. You have the option of displaying the main memory list
according to
Providers or sorted alphabetically ( ABC... ).
> Use the
arrow up/down keys
to select the desired programme listing (e.g. Provi-
ders)
> Confirm by pressing OK .
This list will show the programmes sorted by provider.
>
Press the green function key (Selection) in order to display a list of providers, from
which one can be selected.
> Use the
arrow keys
to mark the provider selected.
> Confrim by pressing OK.
A list of programmes relating to the selected provider will be displayed. Programmes
that have already been entered in the selected user list are marked with a check sign.
a) Selecting programmes
In order to add a programme to a user list, or to delete a programme, proceed as follows:
>
Press the blue function key (edit mode).
The coloured function keys can now be used to execute the following functions:
b) Select user list:
> Press the yellow function key repeatedly to switch around between the user lists
Video A, B, C, D
. The selected list will be displayed in the
green
function field.
c) Entering into the user programme list
> Now use the arrow up/down keys to select a programme that you want to include
in the list.
24
DIGIBOX1_englisch.qxd 26.09.01 09:55 Seite 24