TechniSat 1 - Manual (Page 27)

2. Transponder:
Select this scanning option in order to search only a particular transponder of a satellite. This
will search individually for all programmes of a transponder.
When the scan has been completed, the screen will display information on the number of
programmes your receiver found, and how many of these are new. New programmes are
stored in the main programme memory list and can then be entered in the user lists as
described in
Point 7.1
.
> Call up the Main Menu in order to commence your programme search.
> Use the arrow up/down keys to mark the line Search.
> Confirm by pressing
OK
.
The sub-menu >Search will be displayed.
> Now use the arrow up/down keys to select the search method you wish to
employ.
7.4.1 Satellite
When you activate this search mode, all active satellites (Point 5.4) and transponders will be
scanned for programmes.
>
Use the arrow up/down keys to select the menu line Satellite.
> Press the
OK
key to display the sub-menu.
> Press the OK key again in order to display the table for the active satellite.
27
DIGIBOX1_englisch.qxd 26.09.01 09:55 Seite 27