TechniSat 1 User Manual
Page 28
>
Use the
arrow up/down keys
to mark the line
All
, in order to scan all active
satellites for programmes, or select a specific satellite in order to search for program-
mes only from that source.
>
Choose by pressing the
green
function key whether you want so search only for fre-
ely available programmes (
Search all free
) or whether you also want to search for
encrypted programmes (
Search all
).
>
Confirm by pressing the
red
function key (“Start search”).
The scan will commence. Please note further information that appears on screen.
>
Press the
red
function key again to end the scan.
A full scan may take more than 15 minutes.
Please also note any additional information provided on screen.
7.4.2 Transponder
Use this menu point to search for programmes specifically from a particular transponder (see
Point 9 Technical Terms. For this, it is necessary to enter the transponder data.
>
Use the
arrow up/down keys
to mark the line
Transponder
.
>
Confirm by pressing
OK
.
The menu
>Search>Transponder
will be displayed.
Satellite
In this line, mark the satellite on which the selected transponder is installed.
>
Use the
arrow up/down keys
to mark the line
Satellite
.
>
Press the
OK
key to display a table of active satellites.
>
Use the
arrow up/down keys
to mark the desired satellite.
>
Confirm by pressing
OK
.
The selected satellite will now be displayed in the line Satellite.
Transponder frequency
>
Use the
arrow up/down keys
to mark the line
Transponder frequency.
>
In this line, enter the required frequency by means of the
numeric keys
.
Symbol rate
The symbol rate indicates the volume of data transmitted per second. For instance, this can
be 27500 (27500 symbols per second).
>
Use the
arrow up/down keys
to mark the line
Symbol rate.
>
Use the
numeric keys
to enter the desired symbol rate.
Polarisation
>
Use the
arrow up/down keys
to mark the line
Polarisation.
>
In this line, use the
OK
key to enter the polarisation plane (
horiz
ontal or
vert
ical) on
which the desired programme is broadcast.
>
Use the
green
function key to select whether you want to search only freely receiva-
ble programmes (
Search all free
) or whether you also want to search encrypted
programmes (
Search all
).
28
DIGIBOX1_englisch.qxd 26.09.01 09:55 Seite 28