Technicolor - Thomson 210i - Manual (Page 24)

SpeedTouch 210i
20
IP address/netmask should be configured using the public IP address. Other local PCs
should set the router IP address as the default gateway. When the ISDN connection to the
ISP has been established, each local PC will directly route to the Internet. Also, you could
use the first IP address/netmask to connect to other private users (PCs). These user's IP
addresses will be translated to the second IP address by the router and sent out via ISDN.
Router IP Network Configuration:
For NAT Usage
♦
1st IP Address – Private IP address for connecting to a local private network
(Default: 10.0.0.139).
♦
1st Subnet Mask – Netmask for the local private network (Default:
255.0.0.0).
For IP Routing Usage – (Default: Disable)
♦
Enable – Enable the 2nd IP address settings.
♦
Disable – Disable the 2nd IP address settings.
♦
2nd IP Address – Set a public IP address.
♦
2nd Subnet Mask – Set a netmask for the public IP address.
DHCP Server Configuration:
Dynamic Host Configuration Protocol can automatically dispatch related IP settings to any
local user configured as a DHCP client. The DHCP server supports up to 253 users (PCs)
on the local network.
♦
Activate – (Default: No )
♦
Yes – Enable the DHCP server.
♦
No – Disable the DHCP server.
♦
Start IP Address – Set the start IP address of the IP address pool.
♦
IP Pool Counts – Set the number of IPs in the IP address pool.
♦
Gateway IP Address – Set the Gateway IP address.
♦
DNS Server IP Address – (Default: None) DNS stands for Domain Name
System. Every Internet host must have a unique IP address. They may also