Technicolor - Thomson 210i - Manual (Page 29)

SpeedTouch 210i
25
automatically. For more detailed BOD parameter settings, refer to the
Advanced Setup group > Call Control and PPP/MP Setup.
♦
PPP Authentication – Two types of authentication
PAP Only - Set the PPP session to use the PAP protocol to negotiate
the username and password with the ISP.
PAP or CHAP - Sets the PPP session to use the PAP or CHAP
protocols to negotiate the username and password with the ISP.
IP Address Assignme nt Method (ICPC)
♦
Fixed IP and Fixed IP Address – In most environments you should not
change the default settings as most ISPs provide a dynamic IP address for the
router when it connects to the ISP. If your ISP provides a fixed IP address,
check Yes and enter the assigned IP address in the Fixed IP Address field.