Technicolor - Thomson 210i - Manual (Page 39)

SpeedTouch 210i
35
- Callback Budget: Specify a time budget for the callback function.
By default the budget is set to zero, which means no call back
attempt will work.
TCP/IP Network Settings
The following settings are required for proper LAN-to-LAN operation.
♦
My WAN IP – In most cases you may accept the default value in this field.
The router will then get a WAN IP address from the remote router during the
IPCP negotiation phase. If the WAN IP address is fixed by remote, specify the
fixed IP address here.
♦
Remote Gateway IP – Specify the IP address of the remote router.
♦
Remote Network IP – Specify the network identification of the remote
network. For example, 192.168.1.0 is a network identification of a class-C
subnet with netmask 255.255.255.0 (/24).
♦
Remote Network Mask – Specify the netmask of the remote network.
♦
RIP Direction – The option specify the direction of RIP (Routing Information
Protocol) packets through the ISDN WAN connection.
♦
RIP Version – Select the RIP protocol version. Specify Ver. 2 for greatest
compatibility.
♦
For NAT operation, treat remote sub-net as – Toggle between Private IP
and Public IP.