Technicolor - Thomson 210i - Manual (Page 62)

SpeedTouch 210i
58
♦
Refresh – To obtain the latest information, click here to reload the page.
ISDN
♦
ISDN Link Status – If the link is active, this field will show up . Otherwise, it
shows down .
♦
Dial ISDN – Clicking here causes the router to dial to the preset ISP. Click
Internet Access Setup
→
Dial to a Single ISP to configure dial-up settings.
♦
Activity – Displays the connection name for each B channel. If the B channel is
idle, it will show Idle.
Drop B1 - Click to disconnect the B1 channel.
Drop B2 - Click to disconnect the B2 channel.
Broadband Access
♦
Broadband Access Mode/Status –
Not relevant for the Back-up application.
♦
WAN IP Address – The WAN IP address for the active connection.
♦
Dial PPPoE or PPTP – Click to force the router to establish a PPPoE or
PPTP connection.
♦
Drop PPPoE or PPTP – Click to force the router to disconnect the current
active PPPoE or PPTP connection.
Triggered Dial-out Packet Header
Triggered Dial-out Packet Header shows the last IP packet header that triggers the router
to dial out.