Technicolor - Thomson 210i - Manual (Page 41)

SpeedTouch 210i
37
Click Call Control and PPP/MP Setup and specify a phone number in the Remote
Activation field.
Call Control Setup
Dial Retry and Dial Delay Interval
These two parameters set global settings for ISDN dialup access.
♦
Dial Retry – Specify the dial retry counts per triggered packet. A triggered
packet is any packet whose destination is outside the local network. The
default setting is no dial retry. If set to 5, for each triggered packet, the router
will dial 5 times until it is connected to the ISP or remote access router.
♦
Dial Delay Interval – Specify the interval between dialup retries. By default,
the interval is 0 seconds.
Remote Activation
If the router accepts a call from the number 12345678, it will disconnect immediately and
dial to the ISP. Note that Internet Access Setup
→
Dialing to a Single ISP should be
preset properly.
PPP/MP Dial-Out Setup
Basic Setup