Technicolor - Thomson 210i - Manual (Page 9)

SpeedTouch 210i
5
Network Address Translation (NAT)
For small office environments, the SpeedTouch 210i allows multiple users on the LAN to
access the Internet concurrently through a single Internet account. This provides Internet
access to everyone in the office for the price of a single user.
NAT address mapping can also be used to link two IP domains via a LAN-to-LAN
connection.
LAN-to-LAN Enterprise Connections
The SpeedTouch 210i can dial to or answer calls from another remote access router
connected to a different LAN. The SpeedTouch 210i supports TCP/IP and has the
capability to bridge any Ethernet protocol.
Remote Dial-In Server
The SpeedTouch 210i allows Remote Dial-in Users to dial in and gain access to your
LAN. This feature enables users that have workstations with remote access capabilities,
e.g., Windows 98, to dial in using an ISDN terminal adapter (TA) to access the network
resources without physically being in the office.
What This Manual Covers
This manual is divided into thirteen parts.
♦
Chapter One, “Introduction,” describes many of the technologies
implemented in the SpeedTouch 210i as well as product features,
etc.
♦
Chapter Two, “Installation and Setup,” is designed as a step-
by-step guide to installing the router. In addition, descriptions of
the front panel and rear panel are provided.
♦
Chapter Three, “Basic Configuration and Internet Access,”
provides detailed explanations for basic setup and Internet access
setup. It also covers ISDN dial-
up Internet access.
♦
Chapter Four, “Remote Access,” provides an introduction to
remote access, including remote dial-in access and LAN-to-LAN
access.
♦
Chapter Five, “Advanced Setup,” describes how to enable the
remote activation function, and configure the BOD parameters, as
well as information relating to NAT setup and IP filter and firewall
setup.