Document Outline

• 1 SAFETY CONVENTIONS
• 2 SAFETY TRAINING INFORMATION
  • 2.1 RF EXPOSURE GUIDELINES
  • 2.2 ELECTROMAGNETIC INTERFERENCE/COMPATIBILITY
• 3 OPERATING TIPS
  • 3.1 EFFICIENT RADIO OPERATION
    • 3.1.1 Antenna Care and Replacement
    • 3.1.2 Electronic Devices
    • 3.1.3 Aircraft
    • 3.1.4 Electric Blasting Caps
    • 3.1.5 Potentially Explosive Atmospheres
• 4 BATTERIES
  • 4.1 CONDITIONING BATTERY PACKS
    • 4.1.1 Conditioning NiMH Battery Packs
    • 4.1.2 Conditioning NiCD Battery Packs
    • 4.1.3 Additional Information
  • 4.2 CHARGING BATTERY PACKS
    • 4.2.1 Charging Guidelines
  • 4.3 BATTERY PACK USAGE
    • 4.3.1 Usage Guidelines
  • 4.4 CHANGE THE BATTERY PACK
    • 4.4.1 Remove the Battery Pack
    • 4.4.2 Attach the Battery Pack
  • 4.5 BATTERY DISPOSAL
• 5 INTRODUCTION
  • 5.1 WATER RESISTANCE (P7200 ONLY)
  • 5.2 UNIVERSAL DEVICE CONNECTOR (UDC)
• 6 OPTIONS AND ACCESSORIES
• 7 CHANGE OPERATING MODE
  • 7.1 CHANGE FROM OTP MODE
  • 7.2 CHANGE TO OTP MODE
• 8 OPENSKY OPERATION
  • 8.1 POWER ON/OFF AND VOLUME CONTROL
    • 8.1.1 Power ON/OFF
    • 8.1.2 Volume Control
  • 8.2 CONTROLS
    • 8.2.1 Buttons and Knobs
    • 8.2.2 Keypad (P7250, P5250, and P7270)
  • 8.3 DISPLAY
  • 8.4 RADIO STATUS ICONS
  • 8.5 TRI-COLOR LED
  • 8.6 LOG IN TO THE NETWORK
  • 8.7 LOG OFF THE NETWORK
  • 8.8 PERSONALITY
    • 8.8.1 Profiles
    • 8.8.2 Talk Groups
  • 8.9 OPENSKY DISPLAY OVERVIEW
    • 8.9.1 Display’s Top Line
    • 8.9.2 Display’s Second Line
    • 8.9.3 Dwell Display
  • 8.10 ALERT TONES
  • 8.11 BASIC MENU STRUCTURE
  • 8.12 ERROR MESSAGES
  • 8.13 KEYPAD
    • 8.13.1 Keypad Function Commands (P7270 Only)
    • 8.13.2 Quick Buttons (P7270 Only)
    • 8.13.3 LOCK/UNLOCK the KEYPAD
    • 8.13.4 Dual-Tone Multi-Frequency (P7270 only)
  • 8.14 CHANGE THE ACTIVE PROFILE
  • 8.15 CHANGE THE SELECTED TALK GROUP
  • 8.16 ADJUST DISPLAY AND BUTTON BACKLIGHT BRIGHTNESS
  • 8.17 STEALTH MODE
    • 8.17.1 Enable Stealth Mode
    • 8.17.2 Disable Stealth Mode
  • 8.18 ADJUST SIDE TONE AUDIO LEVEL
  • 8.19 CHANGE OPERATING MODE
  • 8.20 RECEIVE AND TRANSMIT VOICE CALLS
    • 8.20.1 Receive a Voice Call
    • 8.20.2 Transmit a Voice Call
  • 8.21 ADJUST AUDIO TREBLE LEVEL
  • 8.22 TALK GROUP LOCK OUT
    • 8.22.1 Lock Out a Talk Group
    • 8.22.2 Unlock a Talk Group
  • 8.23 SCANNING
    • 8.23.1 Select Scan Modes
    • 8.23.2 Change Active Scan Mode
      • 8.23.2.1 Duration of Scanning Mode Selections
    • 8.23.3 Scan Priority
      • 8.23.3.1 Change Scan Priority
  • 8.24 MAKE SELECTIVE CALLS
    • 8.24.1 Manually Dialing a Selective Call (P7270 Only)
    • 8.24.2 Selective Call Using Speed Dial
    • 8.24.3 Accept a Selective Call
    • 8.24.4 Reject a Selective Call
    • 8.24.5 Terminate a Selective Call
  • 8.25 SELECTIVE ALERTS
    • 8.25.1 Define Messages
    • 8.25.2 Send a Message
      • 8.25.2.1 Select a Destination Using the Keypad (P7270 Only)
      • 8.25.2.2 Select a Destination Using the Menu
    • 8.25.3 Receive a Message
    • 8.25.4 Delete a Selective Alert Message
  • 8.26 INTERCONNECT CALLS (P7270 ONLY)
    • 8.26.1 Make an Interconnect Call
    • 8.26.2 Receive an Interconnect Call
  • 8.27 EMERGENCY COMMUNICATIONS
    • 8.27.1 Declare an Emergency Call or Alert
    • 8.27.2 Receive an Emergency Call
    • 8.27.3 Dismiss an Emergency
    • 8.27.4 Clear an Emergency
  • 8.28 OPENSKY ENCRYPTION (P7200 ONLY)
    • 8.28.1 Automatic Encryption
      • 8.28.1.1 Using Automatic Encryption
    • 8.28.2 Manual Encryption (P7270 Only)
      • 8.28.2.1 Using Manual Encryption
  • 8.29 DYNAMIC REGROUPING
  • 8.30 GPS COORDINATES
  • 8.31 V-TAC FUNCTIONS
    • 8.31.1 Extended Coverage Modes (“XCOV” and “XCOVTG”)
    • 8.31.2 Change Between Extended Coverage Modes
    • 8.31.3 Use the XCOV Mode
      • 8.31.3.1 Manually Access the XCOV Mode
    • 8.31.4 Use the XCOV-TG Mode
      • 8.31.4.1 Radio Limitations Using XCOV-TG
      • 8.31.4.2 Access the XCOV-TG Mode
    • 8.31.5 Use the Scene-of-Incident Mode
• 9 EDACS AND P25 TRUNKED OPERATION
  • 9.1 TURN ON THE RADIO
  • 9.2 CONTROLS
    • 9.2.1 Buttons and Knobs
    • 9.2.2 Keypad (P7250, P5250, and P7270)
  • 9.3 DISPLAY
  • 9.4 RADIO STATUS ICONS
  • 9.5 TRI-COLOR LED
  • 9.6 STATUS MESSAGES
  • 9.7 ERROR MESSAGES
  • 9.8 ALERT TONES
  • 9.9 SYSTEM SELECTION
  • 9.10 GROUP/CHANNEL SELECTION
  • 9.11 MODIFY SCAN LIST
    • 9.11.1 P7270 Model
    • 9.11.2 P7250 and P5250 Models
  • 9.12 NUISANCE DELETE (P7270 MODEL)
  • 9.13 BACKLIGHT ON/OFF
  • 9.14 CONTRAST ADJUST
  • 9.15 DECLARE AN EMERGENCY
  • 9.16 LOCK/UNLOCK THE KEYPAD
  • 9.17 HIGH/LOW POWER ADJUSTMENT
    • 9.17.1 Using the Menu Button
    • 9.17.2 Using the Pre-Programmed Option Button
  • 9.18 MENU
    • 9.18.1 Menu Item Selection Process
  • 9.19 DIGITAL VOICE OPERATION
    • 9.19.1 Clear Mode
    • 9.19.2 Digital Mode
    • 9.19.3 Private Mode (P7200 Only)
      • 9.19.3.1 Display the Currently Used Cryptographic Key Number
      • 9.19.3.2 Key Zero
    • 9.19.4 Private Operation (P7200 Only)
      • 9.19.4.1 Receive an Encrypted Call
      • 9.19.4.2 Transmit an Encrypted Call
      • 9.19.4.3 Scanned Group Calls
  • 9.20 SCAN TRUNKED GROUPS
    • 9.20.1 Turn Scan On and Off
    • 9.20.2 Add Groups to a Scan List
    • 9.20.3 Delete Groups from a Scan List
    • 9.20.4 Nuisance Delete
  • 9.21 SCAN TRUNKED SYSTEMS
    • 9.21.1 Wide Area System Scanning
    • 9.21.2 Priority System Scan
      • 9.21.2.1 Enabling the Wide Area System Scan Function
      • 9.21.2.2 When ProScan is Enabled
    • 9.21.3 ProScan
  • 9.22 EMERGENCY OPERATION
    • 9.22.1 Receive an Emergency Call
    • 9.22.2 Declare an Emergency Call
    • 9.22.3 Clear an Emergency Call
  • 9.23 INDIVIDUAL CALLS
    • 9.23.1 Receive and Respond to an Individual Call
    • 9.23.2 Send an Individual Call
      • 9.23.2.1 Pre-Stored Individual Calls
      • 9.23.2.2 Direct Dial Individual Calls (System Model Only)
    • 9.23.3 Call Storage Lists
  • 9.24 TELEPHONE INTERCONNECT CALLS
    • 9.24.1 Receive a Telephone Interconnect Call
    • 9.24.2 Send a Telephone Interconnect Call
      • 9.24.2.1 Pre-Stored Number
      • 9.24.2.2 Direct Dial Phone Calls (P7270 Model Only)
    • 9.24.3 Dual-Tone Multi-Frequency: Overdial/Conventional Mode
  • 9.25 PROGRAMMABLE ENTRIES
    • 9.25.1 Pre-Store Individual and Telephone Interconnect Calls from the Keypad
  • 9.26 STATUS/MESSAGE OPERATION
    • 9.26.1 Status Operation
    • 9.26.2 Message Operation
  • 9.27 DYNAMIC REGROUP OPERATION
    • 9.27.1 Emergency Operation
  • 9.28 MACRO KEY OPERATION
  • 9.29 PORTABLE DATA
    • 9.29.1 Displays
    • 9.29.2 DATA OFF Operation
    • 9.29.3 DATA ON Operation
    • 9.29.4 Exit Data Calls
    • 9.29.5 Scan Lockout Mode
    • 9.29.6 Data Lockout Mode
  • 9.30 PAGE (P25 TRUNKED ONLY)
• 10 PROJECT 25 (P25) CONVENTIONAL OPERATION
  • 10.1 TURN ON THE RADIO
  • 10.2 CONTROLS
    • 10.2.1 Buttons and Knobs
    • 10.2.2 Keypad (P7250, P5250, and P7270)
  • 10.3 DISPLAY
    • 10.3.1 Radio Status Icons
  • 10.4 TRI-COLOR LED
  • 10.5 STATUS MESSAGES
    • 10.5.1 Error Messages
  • 10.6 ALERT TONES
  • 10.7 SYSTEM SELECTION
  • 10.8 GROUP/CHANNEL SELECTION
  • 10.9 MODIFY SCAN LIST
    • 10.9.1 P7270 System Model
    • 10.9.2 P7250 and P5250 Model
  • 10.10 NUISANCE DELETE (P7270 MODEL)
  • 10.11 BACKLIGHT ON/OFF
  • 10.12 CONTRAST ADJUST
  • 10.13 DECLAR AN EMERGENCY
  • 10.14 LOCK/UNLOCK KEYPAD
  • 10.15 HIGH/LOW POWER ADJUSTMENT
    • 10.15.1 Using the Menu Button
    • 10.15.2 Using the Pre-Programmed Option Button
  • 10.16 MENU
    • 10.16.1 Menu Item Selection Process
  • 10.17 DIGITAL VOICE OPERATION
    • 10.17.1 Clear Mode
    • 10.17.2 Digital Mode
    • 10.17.3 Private Mode (P7200 Only)
      • 10.17.3.1 Display the Currently Used Cryptographic Key Number
      • 10.17.3.2 Key Zero
    • 10.17.4 Private Operation (P7200 Only)
      • 10.17.4.1 Receive an Encrypted Call
      • 10.17.4.2 Transmit an Encrypted Call
      • 10.17.4.3 Scanned Group Calls
  • 10.18 GROUP CALLS IN P25 MODE
    • 10.18.1 Transmit a Group Call
    • 10.18.2 Receive a Group Call
  • 10.19 INDIVIDUAL CALLS IN P25 MODE
    • 10.19.1 Transmit an Individual Call
    • 10.19.2 Receive an Individual Call
  • 10.20 EMERGENCY GROUP CALLS IN P25 MODE
    • 10.20.1 Declare an Emergency Group Call
    • 10.20.2 Receive an Emergency Group Call
• 11 CONVENTIONAL OPERATION
  • 11.1 CONTROLS
    • 11.1.1 Buttons and Knobs
    • 11.1.2 Keypad (P7250, P5250, and P7270)
  • 11.2 DISPLAY
    • 11.2.1 Radio Status Icons
  • 11.3 TRI-COLOR LED
  • 11.4 STATUS MESSAGES
    • 11.4.1 Error Messages
  • 11.5 ALERT TONES
  • 11.6 TURN ON THE RADIO
  • 11.7 SYSTEM SELECTION
  • 11.8 CHANNEL SELECTION
  • 11.9 MODIFY SCAN LIST
    • 11.9.1 P7270 Model
    • 11.9.2 P7250 and P5250 Model
  • 11.10 NUISANCE DELETE (P7270 MODEL)
  • 11.11 BACKLIGHT ON/OFF
  • 11.12 CONTRAST ADJUST
  • 11.13 DECLARE AN EMERGENCY
  • 11.14 LOCK/UNLOCK KEYPAD
  • 11.15 HIGH/LOW POWER ADJUSTMENT
    • 11.15.1 Using the Menu Button
    • 11.15.2 Using the Pre-Programmed Option Button
  • 11.16 MENU
    • 11.16.1 Menu Item Selection Process
  • 11.17 RECEIVE A CALL
  • 11.18 TRANSMIT A CALL
• 12 TECHNICAL ASSISTANCE
  • 12.1 IMMERSIBLE P7200
• 13 BASIC TROUBLESHOOTING