TP-Link TL-WA5110G - Manual (Page 10)

2
Chapter 1. Product Overview
Thank you for choosing TL-WA5110G 54M High Power Wireless Access Point
1.1 Overview of the Product
The TL-WA5110G 54M High Power Wireless Access Point is dedicated to Small Office/Home
Office (SOHO) wireless network solutions. The TL-WA5110G 54M High Power Wireless Access
Point will allow you to connect your network with other wireless devices wirelessly, sharing
Internet Access, files and fun, easily and securely. The high power design will also help you build
a more stable link or cover more area whether indoors or outdoors.
The TL-WA5110G 54M High Power Wireless Access Point provides 3 operation modes for
multi-user to access the Internet: AP client router, AP router and AP. In AP client router mode, it
works as a WISP CPE and can access the Internet wirelessly via your WISP. In AP router mode, it
can access the Internet via an ADSL/Cable Modem, while sharing data wirelessly. In AP mode it
can work in various modes, such as Access Point/Client/WDS Bridge/Repeater.
With the most attentive wireless security, the TL-WA5110G 54M High Power Wireless Access
Point provides multiple protection measures. It can be set to turn off wireless network name (SSID)
broadcast so that only stations that have the SSID can be connected. The AP provides wireless
LAN 64/128/152-bit WEP encryption security, and WPA/WPA2 and WPA-PSK/WPA2-PSK
authentication, as well as TKIP/AES encryption security. It also supports VPN pass-through for
sensitive data secure transmission.
The TL-WA5110G 54M High Power Wireless Access Point complies with the IEEE 802.11g and
IEEE 802.11b standards so that the data transmission rate is up to 54Mbps. The wireless
transmission range can extend up to tens of kilometers.
The TL-WA5110G 54M High Power Wireless Access Point is easy-to-manage. Quick Setup is
supported and friendly help messages are provided for every step. So you can configure it quickly
and share the Internet more quickly and easily.
1.2 Features
¾ Complies with IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u standards.
¾ Wireless Data transfer rates up to 54Mbps.
¾ Supports AP Client Router, AP Router and AP operation mode.
¾ High output transmit power and receive sensitivity optimized.
¾ Supports Client Router Mode for WISP CPE
¾ Supports passive power over Ethernet.
¾ Supports Wireless Distribution System (WDS).
¾ ACK timeout adjustment for long range transmission, up to 50km.
¾ Supports Antenna Alignment.
¾ Provides throughput monitor indicating the current wireless throughput.
¾ Supports Layer 2 User Isolation.
¾ Supports Ping Watch Dog.
¾ Supports link speed test.
¾ Supports Remote Management
¾ Output transmit power adjustable.