TP-Link TL-WA5110G - Manual (Page 71)

63
255.255.255.0 as the subnet mask.
¾ Gateway - The gateway should be in the same subnet as your IP address.
¾ MAC Address - the physical address of the AP, as seen from the LAN. This value can't be
changed.
)
Note:
1） If you change the IP Address, you must use the new IP Address to log in the AP.
2） If the new LAN IP Address you set is not in the same subnet, the IP Address pool in the
DHCP sever will not take effect unless they are re-configured.
3） The device will reboot automatically after clicking Save.
5.6 Wireless
Figure 5-4 Wireless menu
There are eight submenus under the Wireless menu (shown in Figure 5-4):Basic Settings,
Wireless Mode
, Security Settings, MAC Filtering, Wireless Statistics, Distance Setting,
Antenna Alignment and Throughput Monitor. Click any of them, and you will be able to
configure the corresponding function. The detailed explanations for each submenu are provided
below.
5.6.1 Basic Settings
The basic settings for the wireless network in AP operation mode are set on this page.
Figure 5-5 Wireless Settings in AP mode
¾ SSID - Enter a value of up to 32 characters. The same name (SSID) must be assigned to all
wireless devices in your network. The default SSID is TP-LINK_xxxxxx (xxxxxx indicates the