TP-Link TL-WA5110G - Manual (Page 21)

13
Chapter 4. Configuring the Device in AP Client
Router & AP Router Operation Mode
This Chapter describes how to configure some advanced settings for your Access Point through
the web-based management page. In the following explanations, we will take the device in AP
Client Router operation mode for example.
4.1 Login
After your successful login, you can configure and manage the Access Point. There are thirteen
main menus on the left of the Web-based management page. Submenus will be available after
you click one of the main menus. The thirteen main menus are: Status, Quick Setup, Operation
Mode, Network, Wireless, DHCP, Wireless Settings, Forwarding, Security, Static Routing,
IP & MAC Binding, Dynamic DNS
and System Tools. On the right of the Web-based
management page, there are the detailed explanations and instructions for the corresponding
page. To apply any settings you have altered on the page, please click Save.
The detailed explanations for each Web page key’s function are listed below.
4.2 Status
The Status page displays the AP's current status and configuration. All information is read-only.