TP-Link TL-WA5110G - Manual (Page 49)

41
Click Disable to disable UPnP
Click Refresh to update the Current UPnP Settings List.
4.10 Security
Figure 4-35 The Security menu
There are five submenus under the Security menu (shown in Figure 4-35): Firewall, IP Address
Filtering, Domain Filtering, MAC Address Filtering and Advanced Security. Click any of them,
and you will be able to configure the corresponding function. The detailed explanations for each
submenu are provided below.
4.10.1 Firewall
Using the Firewall page (shown in Figure 4-36), you can turn the general firewall switch on or off.
The default setting for the switch is off. Turning the general firewall switch to off will disable IP
Filtering, Domain Filtering and MAC Filtering even if their individual settings are enabled.
If the general firewall switch is off, even if IP Address Filtering, DNS Filtering and MAC Filtering
are enabled, their settings are ineffective.
Figure 4-36 Firewall Settings
¾ Enable Firewall - Enable or disable Firewall.
¾ Enable IP Address Filtering - Enable or disable IP Address Filtering. There are two default
filtering rules for IP Address Filtering: Allow or Deny the packets specified to pass through the
router.
¾ Enable Domain Filtering -
Enable or disable Domain Filtering.
¾ Enable MAC Filtering -
Enable or disable MAC Address Filtering. There are two default