TP-Link TL-WA5110G - Manual (Page 43)

35
Figure 4-26 Add or Modify an Address Reservation Entry
To modify or delete an existing entry:
1. Select a reserved address entry, Click the Modify in the entry if you want to modify it. If you
want to delete the entry, click the Delete.
2. Click the Save button.
Click the Enable All button to make all entries enabled
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page, or Click the Previous button to return the previous
page.
)
Note:
The change of the address reservation won’t take effect until the device reboot.
4.8 Wireless settings
This page allows you to configure some settings for your wireless network, which is shown in
Figure 4-27.
Figure 4-27 Wireless settings
¾ Enable AP Isolation - Isolate all connected wireless stations so that wireless stations can
not access each other through WLAN. This option is available only for AP mode.