TP-Link TL-WA5110G - Manual (Page 31)

23
Figure 4-12 Wireless Mode
)
Note:
In AP Client Router, there is only Client mode available shown as Figure 4-12 while in AP Router
there is only Access Point mode available shown as Figure 4-14 .
¾ Access Point
- Access Point mode allows wireless stations including AP clients to access
the router.
• Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the
Wireless AP will broadcast its name (SSID) on the air.
¾ Client - In Client mode, AP will act as a wireless station to enable wired host(s) to access
wireless AP.